Cal. Business and Professions Code § 12509
Cal. Business and Professions Code § 12509
California · California Business and Professions Code · Status: effective · Effective 2013-01-01
Cite this
- Citation
- Cal. Business and Professions Code § 12509, California, version 1 as recorded 2026-07-25, yourstate.us, https://yourstate.us/provision/777679
- Permanent ID
ys:prov:777679@1- SHA-256
d7f11921be99c272feb14035e2b04b4d6631c4e05335acc42d8560fa8e92f3ad
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) When any weight, measure, or weighing or measuring instrument has been repaired and corrected, and has been reinspected and found correct, the sealer shall remove the tag or device with the words “out of order,” and shall seal and mark that weight, measure, or weighing or measuring instrument in the manner provided for the marking of the same where, upon inspection, it is found correct.
(b) Upon completion of corrective repairs or adjustments, and with the authorization from the sealer, a registered service agency, as defined in Section 12531, may remove an “out of order” tag or device, and the weight, measure, or weighing or measuring instrument may be placed in service pending reinspection by the sealer.