§ 73.1550 Talc.

(a) Identity. (1) The color additive talc is a finely powdered, native, hydrous magnesium silicate sometimes containing a small proportion of aluminum silicate. (2) Color additive mixtures for drug use made with talc may contain only those diluents listed in this subpart as safe and suitable for use in color additive mixtures for coloring drugs. (b) Specifications. Talc shall meet the specifications for talc in the United States Pharmacopeia XX (1980) and the following: Lead and arsenic shall be determined in the solution obtained by boiling 10 grams of the talc for 15 minutes in 50 milliliters of 0.5N hydrochloric acid. (c) Uses and restrictions. Talc may be safely used in amounts consistent with good manufacturing practice to color drugs generally. (d) Labeling requirements. The label of the color additive and of any mixtures prepared therefrom intended solely or in part for coloring purposes shall conform to the requirements of § 70.25 of this chapter. (e) Exemption from certification. Certification of this color additive is not necessary for the protection of the public health, and therefore batches thereof are exempt from the certification requirements of section 721(c) of the act.