Cal. Public Resources Code § 25910
Cal. Public Resources Code § 25910
California · California Public Resources Code · Status: effective
Cite this
- Citation
- Cal. Public Resources Code § 25910, California, version 1 as recorded 2026-07-25, yourstate.us, https://yourstate.us/provision/903554
- Permanent ID
ys:prov:903554@1- SHA-256
66ddf5cfe3f1f7225900dbb3f4fd978e6f9873a2aa379b0d25d18a2bcc804c5f
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
The commission shall, by regulation adopted no later than July 1, 1978, establish minimum standards for the amount of additional insulation (expressed in terms of R-value) installed in existing buildings. One year after the adoption of those standards, no insulation shall be installed in any existing building by a contractor unless the contractor certifies to the customer in writing that the amount of insulation (expressed in terms of R-value) meets or exceeds the minimum amount established by the standards. The minimum standards may vary for different types of buildings or building occupancies and different climate zones in the state. The minimum standards shall be economically feasible in that the resultant savings in energy procurement costs shall be greater than the cost of the insulation to the customer amortized over the useful life of the insulation.