21 CFR 1317.60
§ 1317.60 Inner liner requirements.
United States · 21 CFR — Food and Drugs · Status: effective
Cite this
- Citation
- 21 CFR 1317.60, § 1317.60 Inner liner requirements, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/92291
- Permanent ID
ys:prov:92291@1- SHA-256
71baa3b7731fb75c4e5c853e5fca1c69cc84386bfc0a285149aacc9447ae8d85
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) An inner liner shall meet the following requirements:
(1) The inner liner shall be waterproof, tamper-evident, and tear-resistant;
(2) The inner liner shall be removable and sealable immediately upon removal without emptying or touching the contents;
(3) The contents of the inner liner shall not be viewable from the outside when sealed;
(4) The size of the inner liner shall be clearly marked on the outside of the liner (e.g., 5-gallon, 10-gallon, etc.); and
(5) The inner liner shall bear a permanent, unique identification number that enables the inner liner to be tracked.
(b) Access to the inner liner shall be restricted to employees of the collector.
(c) The inner liner shall be sealed by two employees immediately upon removal from the permanent outer container and the sealed inner liner shall not be opened, x-rayed, analyzed, or otherwise penetrated.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.